Products

Testimonials

“I recently purchased a beautiful fingerboard from you and now I am thinking of grabbing fretwire from you as well. Unfortunately I'm cheap and lazy and find myself here asking if it is possible to pay more to have your fretwire radiused before it is sent? You guys would be the coolest ever. No matter what the outcome, I will be sending more business your way from here in Maine. Hoping for good news! Thank you!"


Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons

SKU: GGSR

  • GGSR14:1 gear ratio
  • Requires a 9/32" post hole if included bushings are used 15/64" if bushings are not used.*
  • 3L/3R on a plate
  • Screws and bushings included

*NOTE: If you use the bushings supplied with these tuners use a 9/32" - 19/64" drill bit. You need to drill a test hole first as drill bits vary in size from their advertised spec. The bushing should fit snugly, but not too tight so as to crack your peghead. If you don't use the bushings and insert the tuners directly into wood, you need 15/64" or B drill bit. Again, you need to test on a piece of scrap material to ascertain that the fit is right.

See schematics



SKU Product Name In Stock Each 3+  
GGSR Gotoh, 3-on-a-plate, slot-head, gold plate, ivoroid buttons Yes $88.31 $78.60