“Great service! I have been impressed with the quality of the items I've received (especially the fretboards). You've been very helpful with some unusual builds (the suggestion to order a bass fretboard slotted from both ends for two short-scale necks was brilliant). I was very surprised at how quickly I received an order of custom-length truss rods. You have a very happy customer."
The transfer adhesive LMI stocks is the same one used by Martin™, Gibson™, Santa Cruz, Taylor, and many other makers of fine instruments. It is perfectly clear, thin (3-5 mils.), extremely aggressive, tenacious, heat resistant (up to 200°), and waterproof. Simply unroll to expose the adhesive, apply to the back of the pickguard, trim away the excess with a sharp knife and (after removing the protective layer of wax paper) press firmly down to the surface. Once you try this method, you will never use anything else. Guaranteed!