Products

Testimonials

“It's nice to know that
I have a good
source for quality
guitar wood as
well as guitar parts
fabrication, such as
LMI's fingerboard
slotting service. 
As I am only set up
to slot 650mm
fingerboards, you
guys have saved my
butt on making me
several odd scale
lengths recently! 
I want you to know
that I appreciate
you guys and the
wood and services
that you supply
to me, a small,
independent luthier. 
Your fine fingerboard
slotting service
saves me a lot of
time and trouble,
for which I am grateful. 
THANK YOU!"

Bob Desmond

Bloodwood replacement buttons, 510 styleElectric knob, Boxwood for 6mm shaft

Gotoh, slot-head, vintage-style, nickel, nickel buttons

SKU: GGMKSLOTN

  • TUNERGotohSlotVintageGGMKSLOTN50015:1 gear ratio
  • Requires an 9/32" post hole if included bushings are used 15/64" if bushings are not used.*
  • Sold in sets of 6 (3L/3R)
  • Screws and bushings are included.

 *NOTE: If you use the bushings supplied with these tuners use a 9/32" - 19/64" drill bit. You need to drill a test hole first as drill bits vary in size from their advertised spec. The bushing should fit snugly, but not too tight so as to crack your peghead. If you don't use the bushings and insert the tuners directly into wood, you need 15/64" or B drill bit. Again, you need to test on a piece of scrap material to ascertain that the fit is right.

See schematics



SKU Product Name In Stock Each 3+  
GGMKSLOTN Gotoh, slot-head, vintage-style, nickel, nickel buttons Yes $37.99 $33.82