Products

Testimonials

"Just received my latest classical guitar kit. I had a couple of requests for wood selection, and you did a great job in selecting on both counts,
In addition, all the wood was great quality - this was an expensive kit, but your product made it a very good value to me.

Thanks for the great work!"

Mike 

Sanding & Joining

 

TOPS: joined and sanded
We join and sand all our tops with 120 grit sandpaper to .110"(2.8mm), except Western Redcedar & Redwood which we sand to : 0.115" (2.9mm) Custom thicknesses are available, please ask.

 

BACKS: joined and sanded, sides sanded
Backs can also be joined and sanded to thickness. You can then route a groove on the centerline and inlay a backstrip. We can include one of our backstrips in the joint if you desire (use product code SVBI). Though many believe the best method is to inlay the backstrip in the center, we are only set-up to ‘sandwich’ it between the plates when we join them. Backs can be sanded unjoined as well if you prefer to join. Sides can be sanded to bending thickness. Sanding thickness: joined back 0.095", unjoined back halves 0.100", sides bending thickness 0.090".

We are unable to insert the following backstrips: BI6B, BI20B

*Thicknesses may vary 5%.
Allow 3 or 4 days for sanding services, and 1 week for joining and sanding or backstrip installation.


SKU Product Name In Stock Each  
SVTJS Sand & join acoustic tops Allow 1 Week for Service $25.00
SVT Sand unjoined top Allow 3-4 Days for Service $15.00
SVRIC Rosette Service - Inlay classical/steel string single-ring rosette Allow 1 Week for Service $65.00
SVRIS Rosette Service - Inlay steel string 3-ring rosette Allow 1 Week for Service $75.00