Our FCA, an industry standard used my many large American factories, is finally available to the small shop user. In the factory environment, it reduced the time the binding had to be bound up to 24 hours! Steve Helgeson of Moonstone Guitars says it has fast tack, sets up quickly and produces fewer fumes than other products he’s used. Frank Ford was also very enthusiastic about it. This product was developed using it in combination with 14 different woods and 28 different plastics and it worked well with all. This means you can use it on oilier woods like Cocobolo with good adhesion.
Here’s what Rick Rubin had to say about our FCA: ”I just used your FCA binding adhesive to reglue the original binding to a new back I made for a 1937 Gibson. It’s great stuff, not noxious, like the stuff in the tube I’ve used for years, and is exceptionally
easy to apply. I’m not going back to the old stuff. Once again you’ve made
available a superior product.”
Our FGW is a cement for bonding plastic to wood. This works well for edge binding but may also be used for bonding pickguards, too. Our customers have told us that no other cement works as well on vinyls, ABS plastics, and most plastic bindings. Great for Bolteron™ where Duco won’t work. Stronger than Duco and other cements, heat buildup from scraping or sanding does not cause the binding to delaminate. It works with cellulose nitrate (ivoroid, “tortoise”), but it does not dissolve the material like other acetone- based cements.
As with any product, practice on a test piece before using on your guitar. These products etch slightly into the plastic and wood, so they are not appropriate for very thin plastic applications.
or a 
or a 
will add one day to 
shipping. 
, it cannot be exported and can ship only in the 50 states of the USA. Click for details.
